This short square pipe section provides an access point when combined with our square cast iron rainwater pipe. The square access pipe is supplied with either eared or plain collars. The access pipe has an rectangular door with two fixing bolts and is available in either a grey primer or a high quality Premier Extra black gloss paint finish.
Our cast iron square rainwater anti-splash shoe is used where the rainwater pipe does not connect directly to a drain. This shoe is available with either the plain or eared collar.
Our cast iron square pipe bends are available in three sizes with three angle settings which range from 92.5 degrees to 135 degrees. The rainwater bends are supplied with a plain collar and are held in position by the pipes or guttering.
Our cast iron square downpipe holderbat is a hinged bracket that supports the pipe around the collar and fastens it to the wall from a single point. Available for all 3 sizes of our square rainwater pipe and supplied in either a grey transit primer or in our Premier Extra gloss black paint finish.
Our cast iron square plinth offset is designed to project your rainwater pipe forward and over any plinth that might be at the foot of your building.
Our cast iron square rainwater pipes are offered in a variety of lengths and this version is the eared variety with the fixing ears cast as part of the collar. The large capacity of the square downpipes make them ideal for larger projects and are supplied with a wide selection of fittings. All our cast iron rainwater pipes are available in either a grey transit primer or in the Premier Extra gloss black painted finish.
Our square to round connector is designed to connect our square cast iron rainwater pipe to our round cast iron rainwater pipe. As such the conversion is designed to fit with our 2.5″ (65mm), 3″ (75mm) or 4″ (100mm) pipes. Due to size of pipe, the 3″x3″ connector should only be used with a 65mm or 75mm outlet. See our cast iron gutter and pipe sizing information for further details.
There is nothing quite like a cast iron square pipe to make your rainwater system stand out. These high capacity pipes are supplied with a wide selection of fittings and are available in either a grey transit primer or in the Premier Extra gloss black painted finish. Our cast iron square rainwater pipes are offered in a variety of lengths and this version is the plain variety without the fixing ear on the collar.
Our cast iron square rainwater shoe is used where the rainwater pipe does not connect directly to a drain. This shoe has the fixing ears cast to the collar making the shoe a front facing option only.
The cast iron plain earband bracket is a designed to fit around the collar of our square rainwater pipe. This version is the plain design but other ornamental patterns are available on request. The cast iron earbands are available in either a grey transit primer or the Premier Extra gloss black paint finish.
Our cast iron square rainwater shoe is used where the rainwater pipe does not connect directly to a drain. This shoe is plain and does not have the fixing ears.
Our cast iron square rainwater shoe is used where the rainwater pipe does not connect directly to a drain. This shoe is available as either left or right hand and can be supplied as plain or with the fixing ears cast to the collar.
Our square pipe loose socket with spigot enables cost saving through utilisation of pipe offcuts. This product is available with cast ears or in plain option.
Our cast iron square pipe branch is available in three sizes with three angle settings which range from 92.5 degrees to 135 degrees. The rainwater branch is supplied with a plain collar and is held in position by the pipes or guttering.
Our cast iron square pipe offset is used to join the pipe to the gutter outlet when then the pipe is not aligned directly below. Our swan neck offsets are available in 10 sizes ranging from 3″ to 24″. This product selection is for projections between 305mm (12″) and 610mm (24″).
Our cast iron square pipe offset is used to join the pipe to the gutter outlet when then the pipe is not aligned directly below. Our swan neck offsets are available in 10 sizes ranging from 3″ to 24″. This product selection is for projections between 56mm (2.25″) and 230mm (9″).