The Notts Ogee fascia bracket can only be used where the guttering is being attached to a fascia board. These cast iron gutter brackets would usually be spaced 900mm apart although additional brackets would be recommended to support fittings. The Notts Ogee is normally direct fixed through the back of the gutter and our profile is supplied with pre-drilled fixing holes.
The Notts Ogee is similar in design to the common Ogee profile but offers a larger capacity due to the increased depth. The Notts Ogee gutter is only available in the one 4.5″ (115mm) size and is offered in either a grey primer or gloss black painted finish.
The Notts Ogee 90 degree gutter angle is available in either a left or right hand fitting. This cast iron angle has a plain end and a socket which determines which is left or right. For a clear guide please click on the ‘Socket Information’ button.
The Notts Ogee obtuse 135 degree gutter angle is available in either a left or right hand fitting. This cast iron angle has a plain end and a socket which determines which is left or right. For a clear guide please click on the ‘Socket Information’ button. The Notts Ogee is similar in design to the common Ogee profile but offers a larger capacity due to the increased depth.
The Notts Ogee nozzle running outlet is designed for use where a downpipe is situated in the middle of a run of guttering. This cast iron outlet has a socket on the left hand side to allow it to be fitted between guttering. This cast iron angle has a socket on the left hand side. For a clear guide please click on the ‘Socket Information’ button.
The cast iron Notts Ogee dropend outlet is designed for use at the end of a run of guttering. The external outlet has a socket on the left hand side to connect to guttering with a right hand plain end. The internal dropend option locates inside the socket of the guttering on the left hand side.
The Notts Ogee stopend is designed for use at the end of a run of guttering and can be used in conjunction with any of the Notts Ogee range of gutter fittings. The external stopend is bigger than the piece it connects to and sits over the plain right hand end and the stopend internal locates inside the socket of the gutter or fitting on the left.
The Notts Ogee union clip is designed to join two plain pieces of guttering which have had the sockets cut off. The cast iron gutter union clip sits on the outside of the guttering helping to reduce wastage and costs by re-using cut pieces.
Unsure if our Notts Ogee cast iron profile will match your existing? Why not request a sample to make sure.
We can provide drawings for all our cast iron gutter and pipe profiles and fittings but it you are still not sure then we will be happy to arrange for a sample to be sent to you.