Our side fix rafter steel brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 5″x 4″ and 6″x4″ H16 Moulded profile, the side fix brackets consist of a single piece which is shaped to suit the required H16 Moulded gutter profile.
The H16 moulded cast iron gutter profile is a large shaped gutter which would usually be required on traditional properties which require an increased capacity. However, this stylish moulded cast iron gutter design is suitable for both new build and for traditional refurbishment projects involving existing rainwater systems. This large cast iron gutter profile is available in either 5” x 4” or 6” x 4” profile widths and is supplied 1829mm (6′) lengths which have a right hand internal joint. The H16 Moulded cast iron gutter profile is available in a grey transit primer or the Premier Extra gloss black paint finish.
The H16 Moulded 90 degree gutter angle is available in either an internal or external fitting. This cast iron angle has a plain end and a joint socket which determines whether it is used on the left or right. For a clear guide please click on the ‘Socket Information’ button.
The H16 Moulded 135 degree obtuse gutter angle is available in either an internal or external fitting. This cast iron angle has a plain end and a joint socket which determines whether it is used on the left or right. For a clear guide please click on the ‘Socket Information’ button.
The H16 Moulded nozzle running outlet is designed for use where a downpipe is situated in the middle of a run of guttering. This cast iron outlet has a right hand internal joint to allow it to be fitted between guttering. Available in two profile sizes and in two sizes of outlet for round pipe.
The cast iron G46 Moulded dropend outlet is designed for use at the end of a run of guttering. The external outlet fits onto the gutter joint on the right hand side whereas the internal dropend locates inside the guttering on the left. For further details concerning sockets and handing of items, please click on the ‘Socket Information’ button. Available in two profile sizes and in two sizes of outlet for round pipe.
The H16 Moulded stopend is designed for use at the end of a run of guttering and can be used in conjunction with any of the H16 Moulded range of gutter fittings. The external stopend is right hand and the internal stopend is left hand. For a clear guide please click on the ‘Socket Information’ button.
The H16 Moulded union clip is designed to join two plain pieces of guttering which have had the sockets cut off. The cast iron gutter union clip helps to reduce wastage and costs by re-using cut pieces.
The H16 Moulded fascia bracket can only be used where the guttering is being attached to a fascia board. These cast iron gutter brackets would usually be spaced 900mm apart although additional brackets would be recommended to support fittings. The H16 Moulded is normally direct fixed through the back of the gutter and our profile is supplied with pre-drilled fixing holes.
Our top fix rafter steel brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″x3″ and 5″x4″ G46 Moulded profile, the top fix brackets consist of a single piece which is shaped to suit the required G46 Moulded profile.
Our drive-in rise & fall brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 5″x4″ and 6″x4″ H16 Moulded profile, our brackets consist of the rise & fall cup and a 12″ drive-in spike.