Our side fix rafter steel brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″x3″ and 5″x 4″ G46 Moulded profile, the side fix brackets consist of a single piece which is shaped to suit the required G46 Moulded profile.
Our top fix rafter steel brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″x3″ and 5″x4″ G46 Moulded profile, the top fix brackets consist of a single piece which is shaped to suit the required G46 Moulded profile.
The G46 Moulded profile of cast iron guttering is available in 2 sizes and is supplied in either a grey primer or gloss black painted finish. Lengths are supplied in 1829mm (6′) lengths and have a right hand internal joint (when facing front) to allow continuous jointing.
The G46 Moulded 90 degree gutter angle is available in either an internal or external fitting. This cast iron angle has a plain end and a joint socket which determines whether it is used on the left or right. For a clear guide please click on the ‘Socket Information’ button.
The G46 Moulded 135 degree obtuse gutter angle is available in either an internal or external fitting. This cast iron angle has a plain end and a joint socket which determines whether it is used on the left or right. For a clear guide please click on the ‘Socket Information’ button.
The G46 Moulded nozzle running outlet is designed for use where a downpipe is situated in the middle of a run of guttering. This cast iron outlet has a right hand internal joint to allow it to be fitted between guttering.
The cast iron G46 Moulded dropend outlet is designed for use at the end of a run of guttering. The external outlet fits onto the gutter joint on the right hand side whereas the internal dropend locates inside the guttering on the left. For further details concerning sockets and handing of items, please click on the ‘Socket Information’ button.
The G46 Moulded stopend is designed for use at the end of a run of guttering and can be used in conjunction with any of the G46 Moulded range of gutter fittings. The external stopend is right hand and the internal stopend is left hand.
The G46 Moulded union clip is designed to join two plain pieces of guttering which have had the sockets cut off. The cast iron gutter union clip helps to reduce wastage and costs by re-using cut pieces.
Unsure if our G46 Moulded cast iron profile will match your existing? Why not request a sample to make sure.
We can provide drawings for all our cast iron gutter and pipe profiles and fittings but it you are still not sure then we will be happy to arrange for a sample to be sent to you.
The G46 Moulded fascia bracket can only be used where the guttering is being attached to a fascia board. These cast iron gutter brackets would usually be spaced 900mm apart although additional brackets would be recommended to support fittings. The G46 Moulded is normally direct fixed through the back of the gutter and our profile is supplied with pre-drilled fixing holes.
Our drive-in rise & fall brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″x3″ and 5″x4″ G46 Moulded profile, our brackets consist of the rise & fall cup and a 12″ drive-in spike.
