The Common OG (Ogee) profile of cast iron guttering is available in 3 widths and is supplied in either a grey primer or gloss black painted finish. Lengths are supplied in 1829mm (6′) lengths and have a socket one the left hand side (when facing front) to allow continuous jointing.
The Ogee 90 degree gutter angle is available in either a left or right hand fitting. This cast iron angle has a plain end and a socket which determines which is left or right. For a clear guide please click on the ‘Socket Information’ button above.
The Ogee obtuse 135 degree gutter angle is available in either a left or right hand fitting. This cast iron angle has a plain end and a socket which determines which is left or right. For a clear guide please click on the ‘Socket Information’ button above.
The Ogee nozzle running outlet is designed for use where a downpipe is situated in the middle of a run of guttering. This cast iron outlet has a socket on the left hand side to allow it to be fitted between guttering.
The Ogee stopend is designed for use at the end of a run of guttering and can be used in conjunction with any of the Ogee range of gutter fittings. The external stopend is bigger than the piece it connects to and sits over the plain end and the stopend internal locates inside the socket of the gutter or fitting.
The Ogee union clip is designed to join two plain pieces of guttering which have had the sockets cut off. The cast iron gutter union clip sits on the outside of the guttering helping to reduce wastage and costs by re-using cut pieces.
The cast iron Ogee dropend outlet is designed for use at the end of a run of guttering. The external outlet has a socket on one side to connect to guttering with a plain end and the dropend internal locates inside the socket of the guttering.
Unsure if our Ogee cast iron profile will match your existing? Why not request a sample to make sure.
We can provide drawings for all our cast iron gutter and pipe profiles and fittings but it you are still not sure then we will be happy to arrange for a sample to be sent to you.
The Ogee fascia bracket can only be used where the guttering is being attached to a fascia board. These cast iron gutter brackets would usually be spaced 900mm apart although additional brackets would be recommended to support fittings. The common Ogee is normally direct fixed through the back of the gutter and our profile is supplied with pre-drilled fixing holes.
Our drive-in rise & fall brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″, 4.5″ and 5″ Ogee profile, our brackets consist of the rise & fall cup and a 12″ drive-in spike.
Our side fix rafter steel brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″, 4.5″ and 5″ Ogee profile, the side fix brackets consist of a single piece which is shaped to suit the required Ogee profile.
Our top fix rafter steel brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″, 4.5″, and 5″ Ogee profile, the top fix brackets consist of a single piece which is shaped to suit the required Ogee profile.