Our most popular profile of cast iron guttering, the Plain Half Round is available in 4 widths and is supplied in either a grey primer or gloss black painted finish. Lengths are supplied in 1829mm (6′) lengths and have a socket at one end to allow continuous jointing.
The Plain Half Round 90 degree gutter angle is available in either a left or right hand fitting. This cast iron angle has a plain end and a socket which determines which is left or right. For a clear guide please click on the ‘Socket Information’ button above.
The Plain Half Round obtuse 135 degree gutter angle is available in either a left or right hand fitting. This cast iron angle has a plain end and a socket which determines which is left or right. For a clear guide please click on the ‘Socket Information’ button above.
The Plain Half Round nozzle outlet is designed for use where a downpipe is situated in the middle of a run of guttering. This cast iron outlet has a socket on both sides to allow it to be fitted between guttering with a plain end on each side.
The Plain Half Round dropend outlet is designed for use at the end of a run of guttering. The external outlet has a socket on one side to connect to guttering with a plain end and the dropend internal locates inside the socket of the guttering.
The Plain Half Round stopend is designed for use at the end of a run of guttering and can be used in conjunction with any of the Plain Half Round range of gutter fittings. The external stopend is bigger than the piece it connects to and sits over the plain end and the stopend internal locates inside the socket of the gutter or fitting.
The Plain Half Round union clip is designed to join two plain pieces of guttering which have had the sockets cut off. The cast iron gutter union clip sits on the outside of the guttering helping to reduce wastage and costs by re-using cut pieces.
Unsure if our Plain Half Round profile will match your existing? Why not request a sample to make sure.
We can provide drawings for all our cast iron gutter and pipe profiles and fittings but it you are still not sure then we will be happy to arrange for a sample to be sent to you.
The Plain Half Round fascia bracket can only be used where the guttering is being attached to a fascia board. These cast iron gutter brackets would usually be spaced 900mm apart although additional brackets would be recommended to support fittings.
Our drive-in steel brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″, 4.5″, 5″ and 6″ plain half round profile, the drive brackets consist of a half round cup section which is welded to a 12″ drive-in spike.
Our drive-in rise & fall brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″, 4.5″, 5″ and 6″ plain half round profile, our brackets consist of the rise & fall cup and a 12″ drive-in spike.
This gutter bracket is designed to fix to your fascia board whilst still offering a rise & fall element to help with uneven or sagging gutters. Manufactured in the UK from 316 stainless steel this fascia rise & fall bracket is produced and sized for cast iron guttering and offers unrivalled strength and durability. Available to fit the 4″, 4.5″ & 5″ plain half round profile.
This gutter bracket is designed to help repair sagging or damaged lengths of gutter. Manufactured in the UK from 316 stainless steel this gutter repair bracket is produced and sized for cast iron guttering and offers unrivalled strength and durability. Available to fit the 4″, 4.5″ & 5″ plain half round profile.
Our side fix rafter steel brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″, 4.5″, 5″ and 6″ plain half round profile, the side fix brackets consist of a single piece which is shaped to suit the required Plain Half Round profile.
This gutter bracket is designed to fix to the side of a rafter whilst still offering a rise & fall element to help with uneven or sagging gutters. Manufactured in the UK from 316 stainless steel this side rafter rise & fall bracket is produced and sized for cast iron guttering and offers unrivalled strength and durability. Available to fit the 4″, 4.5″ & 5″ plain half round profile.
This gutter bracket is designed to fix to the top of a rafter whilst still offering a rise & fall element to help with uneven or sagging gutters. Manufactured in the UK from 316 stainless steel this top rafter rise & fall bracket is produced and sized for cast iron guttering and offers unrivalled strength and durability. Available to fit the 4″, 4.5″ & 5″ plain half round profile.
Our top fix rafter steel brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″, 4.5″, 5″ and 6″ plain half round profile, the top fix brackets consist of a single piece which is shaped to suit the required Plain Half Round profile.
Screw to wall pipe strap bracket (holderbat) for cast iron rainwater pipe. These screw to wall pipe strap brackets are design to fit around the barrel of the pipe below the collar (not around the collar itself). Sizes shown relate to the internal pipe size as this is how they are more commonly referenced.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.