The Beaded Half Round fascia bracket can only be used where the guttering is being attached to a fascia board. These cast iron gutter brackets would usually be spaced 900mm apart although additional brackets would be recommended to support fittings.
The Beaded Half Round union clip is designed to join two plain pieces of guttering which have had the sockets cut off. The cast iron gutter union clip sits on the outside of the guttering helping to reduce wastage and costs by re-using cut pieces.
Our Beaded Half Round profile of cast iron guttering is similar to the Plain Half Round except that this profile has a decorative bead on the front and rear top edges. It is available in 4 widths and is supplied in either a grey primer or gloss black painted finish. Lengths are supplied in 1829mm (6′) lengths and have a socket at one end to allow continuous jointing.
The Beaded Half Round 90 degree gutter angle is available in either a left or right hand fitting. This cast iron angle has a plain end and a socket which determines which is left or right. For a clear guide please click on the ‘Socket Information’ button above.
The Beaded Half Round obtuse 135 degree gutter angle is available in either a left or right hand fitting. This cast iron angle has a plain end and a socket which determines which is left or right. For a clear guide please click on the ‘Socket Information’ button above.
The Beaded Half Round nozzle outlet is designed for use where a downpipe is situated in the middle of a run of guttering. This cast iron outlet has a socket on both sides to allow it to be fitted between guttering with a plain end on each side. Standard outlet sizes for the 4″, 4.5″ & 5″ Beaded Half Round are either 65 or 75mm. The 6″ profile can also accept a 100mm outlet.
The Beaded Half Round dropend outlet is designed for use at the end of a run of guttering. The external outlet has a socket on one side to connect to guttering with a plain end and the dropend internal locates inside the socket of the guttering. Standard outlet sizes for the 4″, 4.5″ & 5″ Beaded Half Round are either 65 or 75mm. The 6″ profile can also accept a 100mm outlet.
The Beaded Half Round stopend is designed for use at the end of a run of guttering and can be used in conjunction with any of the Beaded Half Round range of gutter fittings. The external stopend is bigger than the piece it connects to and sits over the plain end and the stopend internal locates inside the socket of the gutter or fitting.
Unsure if our Beaded Half Round profile will match your existing? Why not request a sample to make sure.
We can provide drawings for all our cast iron gutter and pipe profiles and fittings but it you are still not sure then we will be happy to arrange for a sample to be sent to you.
Our side fix rafter steel brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″, 4.5″, 5″ and 6″ beaded half round profile, the side fix brackets consist of a single piece which is shaped to suit the required Beaded Half Round profile.
Our drive-in rise & fall brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″, 4.5″, 5″ and 6″ beaded half round profile, our brackets consist of the rise & fall cup and a 12″ drive-in spike.
Our top fix rafter steel brackets are UK manufactured and supplied in a galvanised finish as standard. Available to fit the 4″, 4.5″, 5″ and 6″ beaded half round profile, the top fix brackets consist of a single piece which is shaped to suit the required Beaded Half Round profile.